That swap is for the LA computer, not the PF. It has different wiring like I stated with that swap information

 

I have an LA2 computer that I don't need. I bought it off evintho. It is identical to the LA3, ask him to be sure.

I would be willing to sell it if you needed it, you will need brown tops, and a large vam too.

 

i have brown tops, no large vam though. I dont want to have to buy a new ecu..

 

wtf ever happened to evintho?

 

Here is a cart that has the 87 mustangs pains and here is a chart with all the turbo computers

Mustang - http://rothfam.com/svo/reference/87Mustang.pdf
Turbo Engines - http://s129.photobucket.com/albums/p...=pin_out-1.jpg

 

Found my digi was here at home the whole time in plain sight...

















And yes... my garage is messy.

 

Wow, what the hell did you do to that piston[&:]

 

Looks like someone is going to have fun. Looks like my 75 Midget project years ago. Lot of parts. Only no internet and no one to help. Good luck and keep us informed.

 

my oil pump failed to the max and i spun the #2 bearing, thats what the pic of the old crank is, and the block has a crack in the wall... scrap yard here comes some scrap

 

Check end of distributor. It drives the oil pump. Had one of them strip out. I noticed oil pressure before damage done.