HOW TO HOOKUP STARTER SWITCH OR PUSH START BUTTON
#1
HOW TO HOOKUP STARTER SWITCH OR PUSH START BUTTON
I have a 90 mustang gt and i am putting in a new universal starter switch and I need help on how to wire it up before I go hacking wires and screwing anything up. The switch needs 4 wires to hook up. A starter wire, accessory wire, ignition wire, and a battery+ Wire. The steering colomn is half way takin apart. I actually see one wire to the key selaniod and its black with a /PURPLE line on it. I also see another set of wires that go into the back of the steering wheel and there are three prongs that kinda rub the back of the wheel. There colors are black blue/black yellow/blue are these the wires that I need? If not what are the colors and location? The car is equip with airbags and cruise.
#2
RE: HOW TO HOOKUP STARTER SWITCH OR PUSH START BUTTON
#4
RE: HOW TO HOOKUP STARTER SWITCH OR PUSH START BUTTON
ORIGINAL: AdderMk2
take every red wire, and connect them to all of the black wires
take every red wire, and connect them to all of the black wires
I guess he's back[8D]
#5
RE: HOW TO HOOKUP STARTER SWITCH OR PUSH START BUTTON
ORIGINAL: pastfast125
LOL, I been thinkin lately, I was like " wtf, adder's being really nice lately, what's the deal?"
I guess he's back[8D]
ORIGINAL: AdderMk2
take every red wire, and connect them to all of the black wires
take every red wire, and connect them to all of the black wires
I guess he's back[8D]
then i found out that im only getting 24 hours this week at work.... now life is BAD
Thread
Thread Starter
Forum
Replies
Last Post
YoungStangsMan
5.0L (1979-1995) Mustang
15
09-05-2015 07:01 PM