[sleeper_inc]

Well I was bored and some people have no idea what the **** to do to take the tiny restrictions out of it.... So here you go guys and gals...


If it looks like this then either its been painted (like mine) or your car has never seen the light of day[&:]


Look at the tiny hole the air has to pass through[&:][&:][&:]


Yet another small hole (see a pattern on these engines yet?)


Pop can showing you how big the hole can be... (this is the small side BTW)


Pop can in the other side... I think ford did something stupid[&:][8D]


Time to grab a drill and a fairly sized drill bit (I think thats 1/4", not that it really matters)


Start a hole


The with the drill at its fatest speed, drag it (put fingers no were near the bit in case it breaks or slipps out)


Then grab the good ol hack saw blade




Here you see the reason you dragged the drill bit... It allows you to now use the hack saw blade to move and twist making the job easier












Now pick you're weapon of choice and go at it. I would use the drill because it works like a hot knife through butter with this plastic


Ones part of the silencer out






Wow, it sure it big in there[&:]


Before starting on the other side (above) I noticed a lip on the side I just did, and it got me wondering if it was just pressed in[&:][&:][&:][>:]




Long and behold it was[&:][&:]






Finding this out it made taking the other sdie out much easier All you need is plyers, and a flat head screw driver, then pry and slip it off.








Looks like a small billy bat almost[&:][&:]






Its big enough in there now to hold my pop can and any other thing I feel like putting in there **HINT HINT**