You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
For those who race (on the track!), post your times along with your modifications. Post your time slips here too. This is also the place to post peak dyno numbers and sheets (please include your mods).
Friendly debating and questioning is allowed, but keep this thread ON-TOPIC!!!
Official 1/4 Times List
Please keep in mind, the mod lists are not company specific and may not include all of the mods done to each car. I try to list everything that will have a noticable effect on the 1/4 et's and/or traps. Please refer to posts to see all of the specific modifications done to each person's car.
CAI=cold air intake
T=tune
AB=Axle back exhaust
DE=true duals
H=Headers (LT = Long Tubes)
C=cams
P&P=ported and polished heads
PH=Powerhouse turbo
XC= Xcharger Supercharger
PC= Procharger
VC=Vortech
CT=Custom Turbo
DR= Drag Radials
ST= street tires
N20(__)= nitrous, the underscore is what hp shot you are using
LCA= Lower control arms
UCA= Upper control arm
DS= aftermarket driveshaft
8.8"(___)=8.8 rear end (gears)
TL(___)=t-loc on the stock 7.5 (gears)
TT(___)=True Trac on the 7.5 (gears)
ASB= anti-squat bracket
STS= short throw shifter
FI= Forged Internals
SC= reworked stock or aftermarket stall converter
S= Shocks
SP= Springs
F4= Forced Four Torque Twister Turbo
Stock
Merlinsrealm- Auto Coupe 15.195 @91.24 w/ 2.309 60'
Fazm- Manual Coupe 15.26 @90MPH
kngdaka- Auto Coupe 15.325 @ __MPH w/ 2.333 60'
Brumby- 15.55 @90.04MPH
joeymustang- Maunaul Coupe 15.6 @89MPH w/ 2.3 60'
BWfVA - Auto Coupe 15.816 @88MPH
supernatural - Auto Coupe 15.7 @87MPH
rampant racing - Auto Coupe 16.353 @84.65MPH
Naturally Aspirated (Bolt ons only)
Boss244- Auto Coupe CAI, T, LTH, DE, DS, TL(4.10's), LCA, ASB, DR's, S, SP 13.81 @9x.xxMPH
# Powerhouse Pipeline Turbo @ 8.5lbs
# Powerhouse Lower Control Arms
# Powerhouse Upper Control Arm
# Steeda Panhard Bar and Brace
# Dual Flowmaster American Thunder Mufflers
# SCT XCAL2
# PHP Alternator Pulley
# Ford Racing 3.73 Gears
# Ford Racing TLOK
# M&H Drag Radials (for track)
299RWHP/347RWTQ on a Mustang Dyno
Mason Dixon Dragway
13.4@105.4 (on street tires)
Modificaitons:
# Powerhouse Pipeline Turbo @ 8.5lbs
# Powerhouse Lower Control Arms
# Powerhouse Upper Control Arm
# Steeda Panhard Bar and Brace
# Dual Flowmaster American Thunder Mufflers
# SCT XCAL2
# PHP Alternator Pulley
# Ford Racing 3.73 Gears
# Ford Racing TLOK
# Nitto Extreme 450's (street tires)
299RWHP/347RWTQ on a Mustang Dyno
__________________
Best 1/4: 10.97@122.09, 1.56 60ft w/4.0 V6
Best 1/4: 11.23@117.11, 1.58 60ft w/5.4 V8 www.rygen.net/stang
Mason Dixon Dragway
13.6@99.1 (on pnero stock street tires)
Modificaitons:
# Zex Base Kit 100 HP Shot
# Zex Racers Kit
# TI CAI
# Powerhouse Lower Control Arms
# Steeda Panhard Bar and Brace
# Magnaflow TruX Xpipe
# Dual Flowmaster American Thunder Mufflers
# SCT XCAL2
# PHP Alternator Pulley
# Ford Racing 3.73 Gears
# Ford Racing TLOK
# Stock Pnero Tires @ 30psi
278RWHP/362RWTQ on a Dynojet
__________________
Best 1/4: 10.97@122.09, 1.56 60ft w/4.0 V6
Best 1/4: 11.23@117.11, 1.58 60ft w/5.4 V8 www.rygen.net/stang
Well, here it is, but I get my car back tues night with the 3:73 t-loc, headers and C&L+sct2, so I hope the time will drop!
Us 131 Martin Michigan
86-88 degrees out and humid
1/3 tank gas (87)
Full street trim plus the original intake and screwdrivers to switch them
S&B intake
Superchips microtuner
JBA true duals with H pipe
MMR throttle body spacer
255/50 Nitto's
drive around water, no burn out
shift at 6200
launch from idle
14.63 at 92.2 in the 1/4 mile. I dont have the timeslip but i do have a video. Iam pretty sure most of you have seen the vid already but i will try to post it again.
Car is a 2005 Automatic, Xcal 2 89 tune from Alternative, AFE CAI, Dual Gt Take offs, Trac-Loc and 3.73, PHP Alt Pulley.
On the 14.63 run i was using the stock p zeros on 17 inch premium wheels.....now Iam rolling on Nitto Drags, no times yet with these.
Now, if that post above is real (no offence) it shows my car is not pulling in the top end at all because I have timeslips that beat those numbers to the 1/8 then fall off
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company