bztz4m

Well I got the car dyno'ed today I got 275hp but they could not get an accure torque number do to a bad singal. The A/F was way to rich it was running at 10.0's for most of the pull. Here is the dyno sheets.


[IMG]local://upfiles/11418/D15894B325BB4F55B6FBCE09E2115362.jpg[/IMG]

[IMG]local://upfiles/11418/0D14FEB95DFC4AAA9F2D26FCF2B8D8CC.jpg[/IMG]

[IMG]local://upfiles/11418/AB342BCF7F5E4F7FBC7EBAF85F3DB203.jpg[/IMG]

Rnstanger

You have the Vortech right? Good numbers. Like 325 at the crank.

bztz4m

Correct I have the Vortech V-2 inter-cooled kit. The tech said there is alot more in her with a good tune under her belt.

Rnstanger

Who's tune did you use? The one that came with the kit?

bztz4m

For the most part it was Vortech but Doug from Bamachips made a small tweak but he was waiting for me to dyno to get the A/F numbers. So I am hoping for some better numbers once the new tune is in place.

scrming

That a good start! Get the A/F straightened out and I would think you'll be right around that 300 mark!!

TorchV6

those numbers are ok. I would expect a whole lot more from the vortech kit. Maybe once you get you A/F ratio straightened you can do better.

bztz4m

Yeah from what I heard there is about another 40 or 50 hp left in her once the A/F numbers are fixed. From what I have read in other forums the tune I got from Vortech is pretty standard with the car running that rich. I guess they do it that way to keep the tune on the safe side.

mustangman02232

when you run boost your supposed to have it dyno tuned, so it really shouldnt be whos tune, its where did he get it done