new engine... tried installing underdrive pulley . 4.0 v6 mustang asp.
09-06-2014, 12:58 PM
#1
2nd Gear Member
Thread Starter
Join Date: Aug 2010
Location: California
Posts: 399
HELP! new engine... tried installing underdrive pulley . 4.0 v6 mustang asp.
brought my car to complete auto car right down my street . brought them the udp pulley and they cant get it off . they tried with a breaker bar and impact gun its an auto and they cannot get the stock pulley off .
ive been watching them and stopping by to check on the vechicle . no luck . any tips
its an asp underdrive pulley that they are trying to install .
ive been watching them and stopping by to check on the vechicle . no luck . any tips
its an asp underdrive pulley that they are trying to install .
Last edited by IvanRad; 09-06-2014 at 01:07 PM.
09-09-2014, 05:44 PM
#4
2nd Gear Member
Thread Starter
Join Date: Aug 2010
Location: California
Posts: 399
The shop brake masters in citrus heights ca is .3 miles away from me. They tried removing it with a breaker bar they tried the recommended pulley puller they laughed. In the 35 years of mechanics they pulled their top tech from Roseville ca. They ended up snapping 3 impact guns. They bought a brand new impact gun from harbor freight and bam! came right off. Carcanix ( local import shop in Rancho Cordova CA ) came over to watch the event unfold on my mustang. When they got the pulley off i was sure the engine was damaged. They started it up with the new gates belt. We installed my brand new JLT intake along with my custom tune from vmptuning. And the car ran like a champ. This car halls ***. combined with the custom tuning for the P&P throttle Body , JLt intake, Pulley i am satisfied. Last mod i will be doing is aluminum driveshaft and rear end.
09-10-2014, 01:51 PM
#5
6th Gear Member
Join Date: Jul 2008
Location: Acworth, GA
Posts: 12,260
The shop brake masters in citrus heights ca is .3 miles away from me. They tried removing it with a breaker bar they tried the recommended pulley puller they laughed. In the 35 years of mechanics they pulled their top tech from Roseville ca. They ended up snapping 3 impact guns. They bought a brand new impact gun from harbor freight and bam! came right off. Carcanix ( local import shop in Rancho Cordova CA ) came over to watch the event unfold on my mustang. When they got the pulley off i was sure the engine was damaged. They started it up with the new gates belt. We installed my brand new JLT intake along with my custom tune from vmptuning. And the car ran like a champ. This car halls ***. combined with the custom tuning for the P&P throttle Body , JLt intake, Pulley i am satisfied. Last mod i will be doing is aluminum driveshaft and rear end.
11-10-2014, 06:54 PM
#6
2nd Gear Member
Thread Starter
Join Date: Aug 2010
Location: California
Posts: 399
Update
Asp underdrive pulley is perfect .
Ac is better when at 1.5 k rpm
My battery did die but its because it was a crap battery from oreillys need an optima battery since i have a sub and UD Pulley.
Better throttle and efficiency
When i dont have a lead foot on the freeway with ac i am receiving 30.2 mpg. With my vmptune and jlt cai.
My alternator is producing enough amp and volts . Even with my sub and ac on had triple aaa test it . Definately a good upgrade if u can ****** one for cheap.
Asp underdrive pulley is perfect .
Ac is better when at 1.5 k rpm
My battery did die but its because it was a crap battery from oreillys need an optima battery since i have a sub and UD Pulley.
Better throttle and efficiency
When i dont have a lead foot on the freeway with ac i am receiving 30.2 mpg. With my vmptune and jlt cai.
My alternator is producing enough amp and volts . Even with my sub and ac on had triple aaa test it . Definately a good upgrade if u can ****** one for cheap.
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM