You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Just thought i would post up some useful information for all you guys wanting to do that 03 04 cobra bumper on your gt.
Will the bumper fit on my 99-04 GT?
Yes it will fit... however you need to drill the mounting holes in the engine bay about 2 or so inches back so that the hood will close without binding
Where can i find a cobra bumper?
The cheapest and easiest way to get one painted is off of ebay. they sell them for 290 bucks plus shipping painted to match your car.
What else do i need?
You will need a right and left bezel, 2 fog lights, 2 brackets and 2 H10 pigtail connectors as well as 2 H10 fog light bulbs. (See note below)
Where can i get all this stuff?
www.latemodelrestoration has all of it. however you can get the pigtails and foglights at just about any auto parts store for 5 bucks a pigtail.
Something i figured out was that H10, 9145 and 9005 are all EXACTLY the SAME!!!! im not sure why there are so many different names for them but when i did my bumper swap i bought a 9005 pigtail with some 9145 silverstars and it hooked up perfectly.
Hope all of this helps
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
ORIGINAL: tcuallstar
Yes it will fit... however you need to drill the mounting holes in the engine bay about 2 or so inches back so that the hood will close without binding
I thought it was only a 1/4" that the posts needed to be moved back..?..
Lynn
__________________
'99 GT automatic
CDC Shaker scoop, K&N Filter
MAC cat back
Max Speed 1 ˝” Lowering springs
KYB GR2 shocks and struts
Cobra front brakes
ORIGINAL: tcuallstar
Yes it will fit... however you need to drill the mounting holes in the engine bay about 2 or so inches back so that the hood will close without binding
I thought it was only a 1/4" that the posts needed to be moved back..?..
Lynn
I have heard different things from different people, i think i did mine at about an inch now that i think about it
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
03-04 Cobra bumper FAQs
