endofcock

Victim, '96 V6 Convertible (chick car)



Ok my friend doesn't want to spend $50 to install her new head unit, so she calls me up and asks me if I'm able to do it, I say "sure" since I've installed several head units but never on Fords.



We figured out that you needs something to hit the clips behind the stock faceplate, I got the torx screws off the front panel directly under the head unit. Where else do I need to unscrew and what's a good way to fabricate a tool to hit the clips?



I would think that there should be a write-up for this considering it's a mustang and you only see 400 websites on them.



Any help would be greatly appreciated!

converted

cut the bends off a clotheshanger. form a perfect U with them. they work great!

fast4rds

Jeez you guys...go to any circut city and ask for a

150-DIN tool for ford cars and trucks...costs 2 bucks, is stainless steel, and is MADE FOR THAT EXACT JOB. 150-DIN