4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

sold the mach 1

Thread Tools
 
Search this Thread
 
Old 05-21-2006, 09:30 PM
  #21  
mustang_montana
4th Gear Member
 
mustang_montana's Avatar
 
Join Date: Feb 2005
Location:
Posts: 1,907
Default RE: sold the mach 1

ORIGINAL: dlazrael

+1. Stock for Stock the Mach1 runs with it.. if not ahead of it. We all know the 99 Cobra may have forged stock internals, but the C/R is only 9.85:1, While the stock Mach 1 has 10.0:1 Stock. IRS vs Solid. Both had 3.55 Gears. And the mach1 is UNDERrated, while the 99 Cobra is OVERrated. SO Yea, the Mach is a better car :P IMHO (not like I'm biased or anything)
correct me if im wrong, but the 99 cobra does not have forged internals. i totally agree though, i would have kept the mach. they are so sexy. comp orange...drool.
mustang_montana is offline  
Old 05-21-2006, 09:37 PM
  #22  
dlazrael
5th Gear Member
 
dlazrael's Avatar
 
Join Date: May 2005
Location: Maryland
Posts: 2,111
Default RE: sold the mach 1

NOt sure about forged internals, though I think they do have them. Did you know a Mach1 has alum block AND alum heads? Hrm! Oh, and no, the 99 cobras had a t45, the 01s had t45/t3650. All 5 spd :-/ So yea, Mach1s are better :P


Solo- NP Mate :P

PS- Modding doesnt nessecarily void you're warranty; For example, if you add exhaust... and your tranny breaks a sycnro, the warranty still applies... unless they can prove you raced it :P Modding just voids the warranty on the parts involved.. Infact, it doesnt always do that. I had my stock H-pipe right side cat collapse on me (right after a race with an SVT lightning...) and they replaced it, despite the steeda catback... :-/
dlazrael is offline  
Old 05-21-2006, 09:38 PM
  #23  
amoosenamedhank
5th Gear Member
 
amoosenamedhank's Avatar
 
Join Date: Nov 2005
Location: MN
Posts: 4,412
Default RE: sold the mach 1

The 99 cobra has a forged crank but that's it. The same ****ty pistons and rods that the rest do. IMO I would have kept with the mach 1. Looks 10x better and I would perfer the solid axle.
amoosenamedhank is offline  
Old 05-21-2006, 10:00 PM
  #24  
so1o2k3
4th Gear Member
 
so1o2k3's Avatar
 
Join Date: Mar 2006
Location:
Posts: 1,882
Default RE: sold the mach 1

The reason why only the crank is forged is because it redlines at nearly 7000 RPM's, and to support that many RPM's the crank needs to be beefed up.
so1o2k3 is offline  
Old 05-21-2006, 10:35 PM
  #25  
dlazrael
5th Gear Member
 
dlazrael's Avatar
 
Join Date: May 2005
Location: Maryland
Posts: 2,111
Default RE: sold the mach 1


ORIGINAL: so1o2k3

The reason why only the crank is forged is because it redlines at nearly 7000 RPM's, and to support that many RPM's the crank needs to be beefed up.
aye, and the Mach1 (MT) have the same forged crank, so whats the difference? Mach1s are meaner looking, faster, better drag handling... and all around better car... oh yea, don't forget the retro gauges! Plus it's a Mach 1, which are even lower production #s than cobras..... :-p and that shaker hood... oh yea :P Oh and did I mention insurance is lower too? :P
dlazrael is offline  
Old 05-21-2006, 10:58 PM
  #26  
so1o2k3
4th Gear Member
 
so1o2k3's Avatar
 
Join Date: Mar 2006
Location:
Posts: 1,882
Default RE: sold the mach 1

again, +1 and thanks for the backup
so1o2k3 is offline  
Old 05-21-2006, 11:21 PM
  #27  
2000GT4.6
6th Gear Member
 
2000GT4.6's Avatar
 
Join Date: Jan 2004
Location: United States
Posts: 12,575
Default RE: sold the mach 1


ORIGINAL: dlazrael

+1. Stock for Stock the Mach1 runs with it.. if not ahead of it. We all know the 99 Cobra may have forged stock internals, but the C/R is only 9.85:1, While the stock Mach 1 has 10.0:1 Stock. IRS vs Solid. Both had 3.55 Gears. And the mach1 is UNDERrated, while the 99 Cobra is OVERrated. SO Yea, the Mach is a better car :P IMHO (not like I'm biased or anything)
A stock 99 should not have forged internals.
2000GT4.6 is offline  
Old 05-21-2006, 11:29 PM
  #28  
dlazrael
5th Gear Member
 
dlazrael's Avatar
 
Join Date: May 2005
Location: Maryland
Posts: 2,111
Default RE: sold the mach 1


ORIGINAL: 2000GT4.6


ORIGINAL: dlazrael

+1. Stock for Stock the Mach1 runs with it.. if not ahead of it. We all know the 99 Cobra may have forged stock internals, but the C/R is only 9.85:1, While the stock Mach 1 has 10.0:1 Stock. IRS vs Solid. Both had 3.55 Gears. And the mach1 is UNDERrated, while the 99 Cobra is OVERrated. SO Yea, the Mach is a better car :P IMHO (not like I'm biased or anything)
A stock 99 should not have forged internals.

I wasn't entirely sure, hence the bolded part above :P
dlazrael is offline  
Old 05-21-2006, 11:33 PM
  #29  
Mark11
2nd Gear Member
 
Mark11's Avatar
 
Join Date: Apr 2006
Location:
Posts: 239
Default RE: sold the mach 1

I know that the 01's have a forged crank and I believe thats it but not sure... personally it depends on what your gonna do with it IMHO... road racing cobra irs, drag mach 1 solid axle, cobra... hell its a cobra. Ive got one and I might consider a straight up trade for a mach 1 but im not sure that I would pay much more for one. But hey im biased
Mark11 is offline  
Old 05-22-2006, 12:16 AM
  #30  
chadrabon
Thread Starter
 
chadrabon's Avatar
 
Join Date: May 2006
Posts: 37
Default RE: sold the mach 1

ya i sold the mach for 17999. but i like the cobra body but i love the machs shaker hood. and i will be able to make the cobra faster with the money i have left from the mach. i bought the cobra with 60k on it for 12,000.not a bad deal its a damn good car. he changed the axles out to solid axles but it doesnt matter to me because nobody in irmo races from a dig they are all pussies.ive seen tons of cobras outrun machs but i think the cobra has forged internals and healthier heads that is what my research tells me. and what ford tells me haha.
chadrabon is offline  


Quick Reply: sold the mach 1



All times are GMT -5. The time now is 08:25 PM.