Help with 1/4 and or HP numbers guys with PI swap
#1
Help with 1/4 and or HP numbers guys with PI swap
Just completed the work on my 1996GT"S" (pretty light 3100-3200lbs) with the following mods, any guesses would be appreciated...
Full PI swap,tuned
BBK L/Ts.
BBK O/R X with Magnaflow muffs
BBK underdrive pulleys.
MSD Coil packs with FRP wires and uradium plugs.
3:73s.
Springs.
MGW shifter...thats good for a 1/10
Full PI swap,tuned
BBK L/Ts.
BBK O/R X with Magnaflow muffs
BBK underdrive pulleys.
MSD Coil packs with FRP wires and uradium plugs.
3:73s.
Springs.
MGW shifter...thats good for a 1/10
#3
RE: Help with 1/4 and or HP numbers guys with PI swap
If the car really does wiegh in at 3100 pounds I bet you can see mid/low 13s pretty easy.
I would guess around 250 WHP. If you make 260+ you are on a friendly dynojet "_"
I would guess around 250 WHP. If you make 260+ you are on a friendly dynojet "_"
Thread
Thread Starter
Forum
Replies
Last Post