4.6 no-start
#11
RE: 4.6 no-start
I would say cam or crank sensor. I dont have any of my service manuals right now, but if I remember right both should have two wires, one 12v power from PCM and the other should have a varying amount of voltage coming out of it depending on engine rpms. So I would take a digital multimeter and check this. Hope this helps.
#12
RE: 4.6 no-start
Thanks man, I'll try that tomorrow. I'll also try pulling the lead on the cam sensor, crank it, THEN see if I can get a code, something smells fishy here. Thanks y'all for your help, this car is my uncle's hot rod town car.
Thanks,
John
Thanks,
John
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
4.6L (1996-2004 Modular) Mustang
3
10-09-2015 03:27 PM