NYTMARE

Those of you who have done the swap, please list your best 1/4 times with the mods you ran with.

quarterhorse

i ran 12.87@107 n/a with a pi swap and modmax stage 2 cams. stock bottom end. cold air pipe. 75mm throttle body and plenum. shorty headers. prochamber and catback. and 4.30 gears.

quarterhorse

that was at 3450 race weight

jersey98gt

4.56 gears that a new ratio

quarterhorse

yea i ran 4.30's with the old setup because the cams only pulled to like 6000rpms. well now i have ported heads and crower stage 3 cams. 590/601 lift. it pulls up to 7000rpms so i had more rpms to play with so i got 4.56

NYTMARE

Do you have a stock block? How's that been holding up for you with the high CR and the cam and N20? Have you had any PTV issues?

quarterhorse

i have an aluminum block. my compression is only like 10 3/4:1 due to my ginormous cometic head gaskets. no ptv issues yet. pulls past 7000 rpms.