When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I was bored today and i was tinkering around with my facory shifter when i decided to do some modifications to it. The straight piece on the end of the rod where the **** goes is about 2 and a half to 3 inches long witch is length that the shifter doesnt need. My shifter **** is one of those that is held in place by set screws so i didnt need the threads so i cut it off right before the bend with my chop saw. I cut a good 2 and a half inches off of it, put it all back together and presto!!! I now have a short shifter that didnt cost me a penny and it works like a charm. Cut the travel down tremendously!!