02StangGuy

i know i just put up a post about getting welds and probly should have asked this question in that post but how much time would i shave off if i got welds in the back with mt e/t streets and skinnies in the front

JJ03MustangGT

will you be runnin slicks or DRs??

02StangGuy

the m/t e/t streets...there drag radials...if thats what you want to call them haha

97stanger

13.3???

02StangGuy

also when i ran that 13.3 i had a crapy 2.0 60ft...since then i have pulled a 1.9 but missed 3rd on that run[:@]so i know right now it will probly run a 13.1...i hope the welds and skinnies put me into the 12s....maby 12.8?

02StangGuy

so u dont think getting that stuff will take off any time what so ever? ha!

97stanger

I dont understand how you think you're going to drop .5 off your 1/4 times from upgradeing from Nitto555R's to M/T et streets....

8banger

I knocked a solid 2 tenths off just my 60 with the DR's and still spin abit....compared to the old street tires....2.07 to a best of 1.98 on the ol steet tires compared to 1.78 best and an average 1.83 ...in the 60 still leaving at only 2500 rpm...need new clutch,,and a install of the 31 axles and unit before I drop the hammer HARD... and almost always,anything picked up in the 60 will equate tp a better 1/4 or 1/8.time. I have always been told......ITs ALL in the 60...

2000GT4.6

If you ran a 13.3 with the nittos and a 2.0 60' I figure you can scratch out a 1.8 or so with the MTs. That should be good for high 12.90s.

8banger

I'd say that 13.1 coming soon ,,,will show up right after those DR's....