underdrive pulleys..
01-12-2005, 05:35 PM
2nd Gear Member
Thread Starter
Join Date: Nov 2004
Location:
Posts: 331
underdrive pulleys..
which 3 do the underdrive pulleys replace?
01-12-2005, 05:39 PM
5th Gear Member
Join Date: Mar 2004
Location: Assachusetts
Posts: 2,898
RE: underdrive pulleys..
Altenator, crank and water pump
01-12-2005, 05:42 PM
2nd Gear Member
Join Date: May 2004
Location: OHIO, WISCONSIN
Posts: 312
RE: underdrive pulleys..
Don't get them if you plan on getting a super charger
01-12-2005, 05:43 PM
2nd Gear Member
Thread Starter
Join Date: Nov 2004
Location:
Posts: 331
RE: underdrive pulleys..
well i bought them already and am going to my garage to install them...i have all the tools i need but wasnt sure which 3 to replace, i thought it was the alternator, waterpump and the underdrive crank..
01-12-2005, 05:50 PM
5th Gear Member
Join Date: Mar 2004
Location: Assachusetts
Posts: 2,898
RE: underdrive pulleys..
Yes it is those...don't mind me with the AC...3 hours sleep last night
The Altenator bolt might be a b*tch to get off so heads up
01-12-2005, 05:52 PM
2nd Gear Member
Thread Starter
Join Date: Nov 2004
Location:
Posts: 331
RE: underdrive pulleys..
no sweat, I got the speicla tool for them from my mechanic at work today...ill let ya know how it all goes when i get home.
01-12-2005, 05:53 PM
2nd Gear Member
Thread Starter
Join Date: Nov 2004
Location:
Posts: 331
RE: underdrive pulleys..
oh yea, i dont have any high temp silicone sealer, is this a prob?? or should i go buy some?
01-12-2005, 05:57 PM
5th Gear Member
Join Date: Mar 2004
Location: Assachusetts
Posts: 2,898
RE: underdrive pulleys..
Shibby...g/l mang
01-12-2005, 06:27 PM
Site Mod
Join Date: Jan 2004
Location: Oh, Hi.... Oh?
Posts: 8,667
RE: underdrive pulleys..
Go buy some... You need it on the crank key to keep oil from leaking out...
And you have to use an impact gun on the alt. pulley or else it just spins...
01-12-2005, 09:53 PM
2nd Gear Member
Join Date: Apr 2004
Location:
Posts: 492
RE: underdrive pulleys..
yeah and boil some water and put your undriven crank in it..let it boil for a minute and take it off with gloves on of course and put it on while its still hot..it makes it alot easier