Search



Go Back   MustangForums.com > Ford Mustang Tech > 4.6L (1996-2004 Modular) Mustang
Sign in using an external account
Register Forgot Password?
Search

4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.
Sponsored by Cruizin Concepts


Welcome to Mustang Forums!
Welcome to Mustang Forums.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!


Reply
 
 
 
 
Thread Tools Search this Thread
Old 07-29-2007, 08:36 PM   #1
99StangGTTN
2nd Gear Member
 
Join Date: Feb 2007
Location:
Posts: 398
Default How to remove pinion????

I am trying to change my gears. I have done this before but it has been a while. I got the pinion flange off and now I am trying to pull the pinion from the housing. It is stuck in there....do I need to remove the front bearing or should I just hammer on it until it falls out??
This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Mustang Forums!
__________________
Hellion 62mm Turbo, Bullit Intake, Accufab T/B, SCT, 60# inj, 3.73's, Spec Stage 3+, Spec Alum. Flywheel, 90MM MAF, U/L CA's, MGW Shifter, Granatelli Tubular Front Suspension, Flows, Eibach Sway Bars, AGX's, Boost-A-Spark, Alum. D/S 415/476 @ 8psi
99StangGTTN is offline   Reply With Quote
Old 07-29-2007, 08:44 PM   #2
czwalga00gt
5th Gear Member
 
Join Date: Jul 2004
Location: Pittsburgh/Dayton
Posts: 3,062
Default RE: How to remove pinion????

Heat the bearing up with a torch for about 15 minutes, then beat the **** out of it. Only bad thing is you might destroy the pinion but if you're putting a new one in no big deal.
__________________
- 00 Audi A4 -- DD
- 00 Mustang GT, procharged, built rear; 12.2 @ 111 -- Sold

- 93 Rx7, Head/Cam LS2, sonic blue wide body, ccw sp500's.
czwalga00gt is offline   Reply With Quote
Old 07-29-2007, 09:01 PM   #3
99StangGTTN
2nd Gear Member
 
Join Date: Feb 2007
Location:
Posts: 398
Default RE: How to remove pinion????

Do I need to remove the oil slinger before trying to take out the pinion?
__________________
Hellion 62mm Turbo, Bullit Intake, Accufab T/B, SCT, 60# inj, 3.73's, Spec Stage 3+, Spec Alum. Flywheel, 90MM MAF, U/L CA's, MGW Shifter, Granatelli Tubular Front Suspension, Flows, Eibach Sway Bars, AGX's, Boost-A-Spark, Alum. D/S 415/476 @ 8psi
99StangGTTN is offline   Reply With Quote
Old 07-29-2007, 09:33 PM   #4
8banger
4th Gear Member
 
8banger's Avatar
 
Join Date: Oct 2006
Vehicle: 1994 Ford Mustang
Location: Kentucky
Posts: 1,460
Default RE: How to remove pinion????

RE-install Old pinion nut(only if you have a new one)(so you dont screw up the threads)...Big Rubber mallet(or BFH)....hammer away.it will come out....just have someone in back to catch it when it finallyflys out....
__________________
8banger is offline   Reply With Quote
Old 07-29-2007, 09:41 PM   #5
99StangGTTN
2nd Gear Member
 
Join Date: Feb 2007
Location:
Posts: 398
Default RE: How to remove pinion????

OK well the threads are already screwed...oh well. I decided I don't have a big enough hammer so I am just gonna wait til tom to get a bigger hammer....
__________________
Hellion 62mm Turbo, Bullit Intake, Accufab T/B, SCT, 60# inj, 3.73's, Spec Stage 3+, Spec Alum. Flywheel, 90MM MAF, U/L CA's, MGW Shifter, Granatelli Tubular Front Suspension, Flows, Eibach Sway Bars, AGX's, Boost-A-Spark, Alum. D/S 415/476 @ 8psi
99StangGTTN is offline   Reply With Quote
Old 07-29-2007, 09:50 PM   #6
8banger
4th Gear Member
 
8banger's Avatar
 
Join Date: Oct 2006
Vehicle: 1994 Ford Mustang
Location: Kentucky
Posts: 1,460
Default RE: How to remove pinion????

Quote:
ORIGINAL: 99StangGTTN

OK well the threads are already screwed...oh well. I decided I don't have a big enough hammer so I am just gonna wait til tom to get a bigger hammer....
It'll come out...just keep hittin...
__________________
8banger is offline   Reply With Quote
Old 07-29-2007, 11:50 PM   #7
99StangGTTN
2nd Gear Member
 
Join Date: Feb 2007
Location:
Posts: 398
Default RE: How to remove pinion????

Its out... I had to use a sledge but it finally decided to come out.
__________________
Hellion 62mm Turbo, Bullit Intake, Accufab T/B, SCT, 60# inj, 3.73's, Spec Stage 3+, Spec Alum. Flywheel, 90MM MAF, U/L CA's, MGW Shifter, Granatelli Tubular Front Suspension, Flows, Eibach Sway Bars, AGX's, Boost-A-Spark, Alum. D/S 415/476 @ 8psi
99StangGTTN is offline   Reply With Quote
Old 07-29-2007, 11:50 PM
MustangForums
Ford Mustang




Paid Advertisement

 
 
 
Reply

Tags
2004, 2006, 95, bearing, gear, gt, housing, large, mustang, pinion, pinon, remove, removing, svo

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to swap in a manaul T5 transmission sleeper_inc 4 Cylinder NA and Turbo 41 11-30-2013 05:31 PM
How to put on a ring and pinion gears??? AZN5.0 5.0L (1979-1995) Mustang 12 06-03-2008 09:59 PM

Advertising

Featured Sponsors
Vendor Directory
New Sponsors
All times are GMT -5. The time now is 01:50 PM.

© Internet Brands, Inc.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.5.2

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
Emails Backup