help please! fast!
#11
RE: help please! fast!
if ur shredding belts its probably not the belt just being low quality, there is a different problem. Make sure all your pulleys are good, and i saw someone said soemthing about the idler puller, that has a tendency to wear out and tilt off center and make belts wear fast. also make sure your tensioner is still good too, same thing as the idler puller
#13
RE: help please! fast!
ORIGINAL: militaryjag05
+1 Gatorback. Just google 106 gatorback belt. That should find you a good belt that better last a long time.
+1 WTF an hour and a half???? i think he is sleeping during the first oh i would say hour and 10 minutes then takes a cigarette break half way through it.
+1 Gatorback. Just google 106 gatorback belt. That should find you a good belt that better last a long time.
+1 WTF an hour and a half???? i think he is sleeping during the first oh i would say hour and 10 minutes then takes a cigarette break half way through it.
+1 gatorback ftw
#14
RE: help please! fast!
i am gettin a weird rattling noise coming from what sounds like the a/c pulley, but from lookin nothing seems to be out of the ordinary.
The Reason i believe the belt to be starting to tear is because i decided belt dressing would help the belt from slipping,(NOOBIE MISTAKE!!!) when in fact it made it worse, i was told to use carburetor cleaner or brake cleaner on the pulleys and belt to clean them off and it seemed to be helping. But i think that it was slipping so bad before that it ruined it and know its starting to break down
The Reason i believe the belt to be starting to tear is because i decided belt dressing would help the belt from slipping,(NOOBIE MISTAKE!!!) when in fact it made it worse, i was told to use carburetor cleaner or brake cleaner on the pulleys and belt to clean them off and it seemed to be helping. But i think that it was slipping so bad before that it ruined it and know its starting to break down
#16
RE: help please! fast!
Make sure you Belt tensioner isnt't ready to burst apart...they sometimes rattle when their about to pop..and belt shredding is also an indication...along with a squealing belt...Look and see if its bowed out from center....
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-16-2015 07:53 PM