CAMS?

Reply Subscribe

Thread Tools

Search this Thread

04-02-2008, 11:25 PM

#11

jst98gtmustang

3rd Gear Member

Thread Starter

Join Date: Aug 2007

Location: WV

Posts: 848

RE: CAMS?

10"terror you got one bad *** stang.

And thanks for all the help guys I been hearing alot of good thing about mph custom cams,think ill check with them.anyone got there website??

04-16-2008, 04:41 PM

#12

filly

Join Date: Apr 2008

Posts: 1

RE: CAMS?

Hi there, came across this thread in my quest for info. I've lurked here for a while and my boyfriend posts on this site (Kris Horton) but this is my first time posting.

I have an 00 GT with an MMR Street Mod 900 forged motor. I was wanting to do a stage 2 port and stage 2 or 2.5 cams. I'm sure it probably depends by manufacturer, but if i were to go with the CMS stage 2 or 2.5, would i be safe without notching the pistons? I've got 18.5cc dished pistons in it now.

04-16-2008, 05:07 PM

#13

10inch Terror

2nd Gear Member

Join Date: Dec 2007

Posts: 402

RE: CAMS?

Quote:

ORIGINAL: filly

Hi there, came across this thread in my quest for info. I've lurked here for a while and my boyfriend posts on this site (Kris Horton) but this is my first time posting.

I have an 00 GT with an MMR Street Mod 900 forged motor. I was wanting to do a stage 2 port and stage 2 or 2.5 cams. I'm sure it probably depends by manufacturer, but if i were to go with the CMS stage 2 or 2.5, would i be safe without notching the pistons? I've got 18.5cc dished pistons in it now.

You will be fine with any of my CMS grinds for PTV if timed (ie. installed) correctly. Thanks!

Jim
Cushman Motorsports