blown head gasket
04-04-2003, 07:30 PM
Thread Starter
Join Date: Apr 2003
Location: United States
Posts: 8
blown head gasket
Can any one give me some good advice on what to to?
04-04-2003, 07:31 PM
I ♥ Acer
Join Date: Mar 2003
Location: United States
Posts: 2,199
blown head gasket
Get it fixed ASAP and don't drive it around untill then.
04-04-2003, 07:35 PM
Thread Starter
Join Date: Apr 2003
Location: United States
Posts: 8
blown head gasket
should i port and polish them?
04-04-2003, 07:40 PM
I ♥ Acer
Join Date: Mar 2003
Location: United States
Posts: 2,199
blown head gasket
Uh....since when can you port/polish gaskets?
04-04-2003, 08:02 PM
Thread Starter
Join Date: Apr 2003
Location: United States
Posts: 8
blown head gasket
THE HEADS!!!!!!!!!!!!!!!!!!!!
04-04-2003, 08:13 PM
Thread Starter
Join Date: Apr 2003
Location: United States
Posts: 8
blown head gasket
<img border="0" src= smileys/smiley3.gif>
04-04-2003, 08:14 PM
2nd Gear Member
Join Date: Mar 2003
Location: United States
Posts: 282
blown head gasket
Yes
04-04-2003, 08:18 PM
Thread Starter
Join Date: Apr 2003
Location: United States
Posts: 8
blown head gasket
about how much does it cost?
04-05-2003, 03:12 AM
I ♥ Acer
Join Date: Mar 2003
Location: United States
Posts: 2,199
blown head gasket
Whatever you get your abrasives kit for.
Look in Summit's catalog.
04-05-2003, 03:21 PM
2nd Gear Member
Join Date: Mar 2003
Location: United States
Posts: 282
blown head gasket
A shop here in San Diego charged my cousin $578 out the door for full P&P, 5-angle valve job, magnaflux, hot tank, milling .010", new retainers, guides, keeper, and valve springs capable of .530" lift. His car is f'n quick. But then again, this is on the 5.0 E7TE heads. Your car is OHC, right? yours might be more