373s are killing my times!
#22
RE: 373s are killing my times!
+1 on the nittos, they should still be hooking fairly well at your power level. What PSI do you have in the rears at the track?
You should not be spinning that hard in 2nd gear, even on bone stock suspension, withyour power level and those tires.
You should not be spinning that hard in 2nd gear, even on bone stock suspension, withyour power level and those tires.
#26
RE: 373s are killing my times!
when i went to the track i ran a best 60' time of 2.1 on worn out wanli street tires(245/45/17) with no mods other than a flomaster cat-back. but when i launched, i would take off from idle to try to keep from spinning. and the car averaged 26 mpg after driving from columbia mo, making 13 passes and then filled up .this was at kcir. not my fastest run here is a vid. http://www.youtube.com/watch?v=jvkcf...p;feature=user
#28
RE: 373s are killing my times!
you need to get those nittos hot and learn to adapt to the gears.
I ran (1/8th) a 9.3 with just an Xpipe, on 245 street tires. I added 4.10s and ran 9.5's to 9.7s and i was pissed. (60 foots got much worse too)
Added ET Drags and now i run 8.66
I ran (1/8th) a 9.3 with just an Xpipe, on 245 street tires. I added 4.10s and ran 9.5's to 9.7s and i was pissed. (60 foots got much worse too)
Added ET Drags and now i run 8.66
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
5.0L GT S550 Tech
7
10-07-2015 04:01 AM
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM