Throwing codes P0171, P0174 Sys too lean 1,2 how do I fix this?
#1
Throwing codes P0171, P0174 Sys too lean 1,2 how do I fix this?
Hey guys, my car is throwing a couple of codes sys too lean 1, and 2. Does anyone know how to fix this or what causes it?
Thanks guys,
-Matt
Thanks guys,
-Matt
#3
No, I have mil's, and the rear o2's are shut off with the xcal2 i'm not sure if I need the mil's anymore. Also I tried putting it back to the stock tune, and it was still throwing the codes. It's weird when I first install the tune it doesn't do it, but like 20 mins later they come on.
Thanks,
-Matt
Thanks,
-Matt
#4
cats or not it wont matter, those codes are for the upstream sensors. the light goes off after u install your tune because doing that erases all codes. clean your maf, if its dirty it will not read the volume of air correctly and these codes will be set. if that doesnt fix it check for vacuum leaks or any air intake leaks
#8
#9
#10
Do the simple checks.... You dont hear any exhaust leaks do you? Leaky manifolds or collectors will set lean codes.. You probably have a vacuum leak.. Spray some 2+2 around the intake where it bolts to the head, and around the tb/plenum + vac lines. If you hear a difference in RPMs when u spray a certain spot, theres the leak.