When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
No you will not need a new belt. Aren't the trickflow UDPs crank pulley a piggy back pulley?
Yes they are. You'll still get decent power from them w/ a tune BUT if they were Steeda pulley's, or any other system w/ a new harmonic balancer, they would get you better power. Plus w/ a piggyback you need to look out cuz u may ruin ur crank.
Yes they are. You'll still get decent power from them w/ a tune BUT if they were Steeda pulley's, or any other system w/ a new harmonic balancer, they would get you better power. Plus w/ a piggyback you need to look out cuz u may ruin ur crank.
Gains are the same both do the same job just in a different design(even though the gains aren't amazing). Theres plenty of people who run piggyback pulleys and not had a problem but some do.
Gains are the same both do the same job just in a different design(even though the gains aren't amazing). Theres plenty of people who run piggyback pulleys and not had a problem but some do.
true but don't most guys have problems w/ piggybacks?
hmm so what should I do at this pont. I cant really sell them becasue they were a gift, and my cusion wanted to see them installed and drive it after the install to see if there was noticable gain.
I can tell you from experience that you won't notice much if anything from UD pulleys. Also, if you ever decide to do a blower like I want to do, you'll be ripping them back off anyway. If I could do it again, I would've gone with something else.