replacing lifters / lash adjusters.
#1
replacing lifters / lash adjusters.
i need some help, ive never worked on one of these 4.6 and i have a lifter that needs replaced on the passenger side , how hard are they to replace? do i need to remove the cam?
can some one give me a step by step or point me to a similar post.
thanks ,
can some one give me a step by step or point me to a similar post.
thanks ,
#3
I would take advantage of the situation, and replace the timing chains while ur down there, it will b a decent amount of tear down but I think it will make life easier in the end, as far as the cams go.
Your rockers n tappets aren't actually bolted to anything, so they are extremely easy to replace. Make sure u r torqd to spec as stated on the cams, and that ur timing marks line up. Also do not let ur cam spin uncontrolled, its enough to mushroom valves, and make sure ALL moving parts are heavily lubed.
The pi write up in my sig is a how to, have fun =)
Your rockers n tappets aren't actually bolted to anything, so they are extremely easy to replace. Make sure u r torqd to spec as stated on the cams, and that ur timing marks line up. Also do not let ur cam spin uncontrolled, its enough to mushroom valves, and make sure ALL moving parts are heavily lubed.
The pi write up in my sig is a how to, have fun =)
Thread
Thread Starter
Forum
Replies
Last Post
Golfsito
GT S197 General Discussion
9
10-06-2015 11:02 AM