4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Car wont run, plz help guys

Thread Tools
 
Search this Thread
 
Old 10-09-2009, 04:05 AM
  #11  
ezking
1st Gear Member
Thread Starter
 
ezking's Avatar
 
Join Date: Dec 2007
Location: Washington
Posts: 112
Default

How do you test the crankshaft position sensor? ... lol
ezking is offline  
Old 10-11-2009, 08:17 PM
  #12  
ezking
1st Gear Member
Thread Starter
 
ezking's Avatar
 
Join Date: Dec 2007
Location: Washington
Posts: 112
Default

Alrighty, so I replaced the alternator, started the car and it ran rough for a couple seconds then died. Tryed it again and it did the same thing. So I peeked around a little more, found another broken vacuum line, fixed that, and discovered that I had mixed up a couple of the wires on the drivers side coil pack, so I straightened that out and was stoked.

Got in the car and went to start it, nothing, turns over but never fires.

Thx for all the help soo far guys, Im really kinda stuck, I know all the things it could be, but I cant quite narrow it down and I cant afford to just start replacing things. <3 these forums
ezking is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
djbigskrilla
2005-2014 Mustangs
24
09-20-2022 01:04 AM
92 5.0stang
5.0L (1979-1995) Mustang
4
08-13-2015 06:46 AM
Milan Dragway
Members Rides and Car Show Section
0
08-12-2015 03:43 PM
Jacob4589
5.0L (1979-1995) Mustang
3
08-08-2015 11:00 AM
J.casone400
General Tech
2
08-07-2015 08:40 PM



Quick Reply: Car wont run, plz help guys



All times are GMT -5. The time now is 09:22 AM.