npi in an 02gt
10-20-2009, 07:57 PM
#11
6th Gear Member
Thread Starter
Join Date: May 2006
Location: earleville md
Posts: 10,357
So update... Got 5 hrs in on it today, have my motor and the donor cars motor both prty close. All that's left on both is trans bolts, motor mounts and to pull the ac compressor off. And out they come. I also decided to say **** it and just swap my heads and **** over for simplicitys sake. So its gonna be a newedge with a npi bottom end and pi top end lol. Random questions but, what's the cr bump to? And what am I gonna gain? 3rwhp? Lol.
Might get the gf to paint some **** while its out... Valvecovers, intake, possibly block any other ideas? Going w a black and limegreen set up... Which will continue thru the car with my ****in Nasty sticker being green, and I want to get ****in nasty embrodered in the front 2 seats also in lime green. Brakes will get it too, as will some suspension parts when I actually fix my uppers... Just little stuff... Anything else u guys would do?
Might get the gf to paint some **** while its out... Valvecovers, intake, possibly block any other ideas? Going w a black and limegreen set up... Which will continue thru the car with my ****in Nasty sticker being green, and I want to get ****in nasty embrodered in the front 2 seats also in lime green. Brakes will get it too, as will some suspension parts when I actually fix my uppers... Just little stuff... Anything else u guys would do?
10-20-2009, 09:41 PM
#12
5th Gear Member
Join Date: Oct 2003
Location: Northern Wisconsin
Posts: 2,010
So update... Got 5 hrs in on it today, have my motor and the donor cars motor both prty close. All that's left on both is trans bolts, motor mounts and to pull the ac compressor off. And out they come. I also decided to say **** it and just swap my heads and **** over for simplicitys sake. So its gonna be a newedge with a npi bottom end and pi top end lol. Random questions but, what's the cr bump to? And what am I gonna gain? 3rwhp? Lol.
Might get the gf to paint some **** while its out... Valvecovers, intake, possibly block any other ideas? Going w a black and limegreen set up... Which will continue thru the car with my ****in Nasty sticker being green, and I want to get ****in nasty embrodered in the front 2 seats also in lime green. Brakes will get it too, as will some suspension parts when I actually fix my uppers... Just little stuff... Anything else u guys would do?
Might get the gf to paint some **** while its out... Valvecovers, intake, possibly block any other ideas? Going w a black and limegreen set up... Which will continue thru the car with my ****in Nasty sticker being green, and I want to get ****in nasty embrodered in the front 2 seats also in lime green. Brakes will get it too, as will some suspension parts when I actually fix my uppers... Just little stuff... Anything else u guys would do?
10-20-2009, 10:23 PM
#13
6th Gear Member
Thread Starter
Join Date: May 2006
Location: earleville md
Posts: 10,357
Lol... It is a newedge. Its an 02gt, sorry I'm used to my sig comming up, but I'm posting from my BB. So it'll be identical to what it was but it'll be a npi bottom end... Which means a **** hair more compression then a pi bottomend. I just forget how much it actually is. I could give 2 ****s about the gain, just wondered for ****s and giggles. Just because its not showing my sig, for u and others that don't know, my car runs 12.0s with 1.6 short times...its deff not a npi car lol
