How to identify PI heads and intake
#1
How to identify PI heads and intake
I purchased a 98 GT while deployed. Now that I'm home, I'm ready to start the mods. I opened the hood and the intake has an aluminum crossover. Now I'm confused. I thought the aluminum crossover was only on the PI intake. I'm wondering if the previous owner put PI heads and intake on. How can I tell without taking the intake off to see the shape of the intake ports?
Thanks for the help.
David
Thanks for the help.
David
#2
the intake manifold may have cracked and been replaced under warranty or whatnot by the previous owner. i think, thats an " i think" the replacement manifolds had aluminum crossovers. the only way i can think to tell for sure is to pull the manifold and look at the intake ports on the heads
#3
I purchased a 98 GT while deployed. Now that I'm home, I'm ready to start the mods. I opened the hood and the intake has an aluminum crossover. Now I'm confused. I thought the aluminum crossover was only on the PI intake. I'm wondering if the previous owner put PI heads and intake on. How can I tell without taking the intake off to see the shape of the intake ports?
Thanks for the help.
David
Thanks for the help.
David
Thread
Thread Starter
Forum
Replies
Last Post
Daddys Girls GTs
5.0L (1979-1995) Mustang
3
09-14-2015 08:46 PM