lizzyfan

Not at all

a_penquin

I thought my full exhaust was a day job, and it turned into a week...... gotta love how it works out.

boduke0220

passengers side is a pain cause of the starter..mods = more cuss words said.

smitty2919

yea, ive called about 5 places for a quote for an install and it stays around $80 - $100

i would just HATE to have a place do it and say it all went together fine then im like **** i could have done it then and im out $100 lol

im one to always do work myself but i know when to pass off some work...im on the fence about this one.

boduke0220

its easy lol if you've ever touched a car you can do this install. prob the easiest bolt on besides and cold air intake or Shifter

a_penquin

I paid $80 for them to fit my x-pipe, got a one year warranty against leaks, and they forgot to put in hangers so when I brought it back they installed them for free.

_Slowbra_

^that....even with the bolts it was easy...just took an extra half hour or so.

smitty2919

im can do this no problem, its when i put it on and it leaks too bad and i cant fix it and it needs to be bend or tweaked to fit right....

im going to try and do it, hope for the best and IF it does leak hope its not THAT bad then i can bring it to a shop after

0440thgt

When I installed my offroad Xpipe, I used a bead of high temp silicone gasket material and I haven't had any leaks so far.

smitty2919

yea I'm going to pick up a donut gasket for the drivers side and I'll have the passenger side gasket, so I have hopes it will be fine.

if the drivers side is off so much that a donut gasket couldn't fill the space, something has to be way off ahaha. and I did not realize until last night when I got the x pipe that the passenger seems to be just a flat gasket. ( I assumed both were ball and socket flanges)