fisher2985

thanks for all the replies. im gonna try a new tailshaft bushing and seal next time we have an empty lift at work. cost me like $17 for the parts.

JoeyStangz00

Hey, sorry not tryin to hijack anyones thread but i used to have really bad vibration at 70 and i changed my driveshaft and most of it went away but now theres always constant vibration not bad but its still there. I was reading about the tailshaft bushing...is it hard to change out and where can i get the parts from? btw its a 2000GT manual. Thanks.

cisurfer

call a tranny shop and see if they can order you the part, for my trans, t3650 you just take off the tail shaft and press a new one in and old one out, you have a t45 im not sure about yours

BraMas

Have any of you guys checked your drive shaft angle?

cliffyk

No lie, I was just now logging on the ask the same question...

JoeyStangz00

how exactly can i check it, and what is it supposed to be at?

cliffyk

This is from the '01 Shop Manual...

sweger

interesting....ill have to check some of these out next weekend when i have her on the lift.

can i visually check the tailshaft bushing? what am i looking for exactly?

99mustanggt

Check the tranny mount too.