Superharger Pulleys
#12
3.33" cuz i was gonna IC it and that pulley works out well with an IC'd setup. i would probably stay at like a 3.6" if your not intercooling. don't want too much boost (heat) without the ic. if you live somewhere really hot maybe even a size bigger.
#13
see if you can find out what size pulley it is, i have a stock 3.60 6 ribbed and a 3.33 6 ribbed pulley,i am changing over to 8 ribbed so i could swap you one of them if your interested, just would need to know what size you have, and like lizzy said if you look on modularfords.com theres a thread for a 8 ribbed set up which cost me about $200, just need a sc pulley and a belt and i am ready to go
Last edited by mustang51js; 06-03-2010 at 03:15 PM.
#14
see if you can find out what size pulley it is, i have a stock 3.60 6 ribbed and a 3.33 6 ribbed pulley,i am changing over to 8 ribbed so i could swap you one of them if your interested, just would need to know what size you have, and like lizzy said if you look on modularfords.com theres a thread for a 8 ribbed set up which cost me about $200, just need a sc pulley and a belt and i am ready to go
Thread
Thread Starter
Forum
Replies
Last Post