Bleeding the conv roof system
09-21-2010, 05:29 PM
#1
1st Gear Member
Thread Starter
Join Date: Aug 2010
Location: California
Posts: 66
Bleeding the conv roof system
I got more fluid in the motor and still not going up. Makes the winding sound though. I was talking to a guy a Ford and he said there is a process to bleeding the system. Does anyone know this proceedure? TIA
09-21-2010, 06:37 PM
#2
TECH SAVANT
Join Date: Dec 2006
Location: Saint Augustine, FL
Posts: 10,938
Here's the procedure--it appears you have to remove the hydraulic system to bleed it...
From the shop manual:
"NOTE: The convertible top hydraulic components are removed from the vehicle as an assembly. The hydraulic components are individually repaired and the system must be bled before being installed into the vehicle." [emphasis added]
From the shop manual:
"NOTE: The convertible top hydraulic components are removed from the vehicle as an assembly. The hydraulic components are individually repaired and the system must be bled before being installed into the vehicle." [emphasis added]
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
AMAlexLazarus
AmericanMuscle.com
0
10-01-2015 09:21 AM
