4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Anybody have 19's on a New Edge?

Thread Tools
 
Search this Thread
 
Old 12-14-2010, 10:29 AM
  #1  
Darkside Designs
Thread Starter
 
Darkside Designs's Avatar
 
Join Date: Dec 2010
Location: Texas
Posts: 5
Default Anybody have 19's on a New Edge?

Okay, the 20's are out. Anyone have 19's on their New Edge? What are the proper sizes/offsets/tires for 19's on the 99-04 Stangs?
Darkside Designs is offline  
Old 12-14-2010, 11:36 AM
  #2  
bbcobra
1st Gear Member
 
bbcobra's Avatar
 
Join Date: Jun 2009
Location: NC
Posts: 85
Default

For tire choices you'll probably need to go to a 30 series tire to stay around 26 inches. for instance a 295/30-19 is 26.1 inches tall in a Bridgestone.
when I was looking I went from a stock 17x9 rim.
Basically a stock 17 inch rim you run a 40 series tire
a 18 inch rim you go to a 35 series tire
then a 19 inch rim you would go to a 30 series tire.

all staying with the same relative width. This does vary when you go up in width and will vary some depending on a different brand of tire.

A good source for tire specs is to go to tirerack.com. enter the size your looking for and click on specs when you pick a tire. you can the go around and search different brands to compare them.

Last edited by bbcobra; 12-14-2010 at 11:38 AM.
bbcobra is offline  
Old 12-15-2010, 05:59 AM
  #3  
03GTType
5th Gear Member
 
03GTType's Avatar
 
Join Date: Sep 2004
Location: Sacramento, California
Posts: 2,988
Default

I have 19" rims with 295's on the rear.
03GTType is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
shrkbate
2010-current S197 Appearance Section
3
10-02-2015 08:25 PM
MusicCity615
New Member Area
18
09-27-2015 12:53 AM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
09-23-2015 01:28 PM



Quick Reply: Anybody have 19's on a New Edge?



All times are GMT -5. The time now is 06:10 PM.