4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Intercooler and PowerPipe

Thread Tools
 
Search this Thread
 
Old 05-24-2011, 02:03 PM
  #1  
rman101
2nd Gear Member
Thread Starter
 
rman101's Avatar
 
Join Date: Dec 2007
Location: Florida
Posts: 405
Default Intercooler and PowerPipe

Hey

With summer right around the corner im looking to finally go with an intercooler
Found this one one Ebay
http://cgi.ebay.com/ebaymotors/3-8PC...Q5fAccessories
Would this have all the pipes needed to install it on the car? (i searched but many links were to dead ebay posts that people bought). I guess i wont need the vortech discharge tube or power pipe with this anymore would I ( I was looking to get these ).

Im at 370 rwhp peak as it sits where do you think I could be after this?

If any one has a GOOD writeup for installing it and maybe going blowthrough would you mind posting it all i have seen are a little different it seems.
rman101 is offline  
Old 05-24-2011, 02:18 PM
  #2  
Rockwell28
4th Gear Member
 
Rockwell28's Avatar
 
Join Date: Jun 2010
Location: TEXAS
Posts: 1,452
Default

https://mustangforums.com/forum/4-6l...aser-pics.html
https://mustangforums.com/forum/4-6l...tall-pics.html
https://mustangforums.com/forum/4-6l...tercooler.html
Rockwell28 is offline  
Old 05-24-2011, 03:37 PM
  #3  
Soldier GT
6th Gear Member
 
Soldier GT's Avatar
 
Join Date: Aug 2007
Location: MO/ Born and raised in Louisiana
Posts: 10,696
Default

Originally Posted by rman101
Hey

With summer right around the corner im looking to finally go with an intercooler
Found this one one Ebay
http://cgi.ebay.com/ebaymotors/3-8PC...Q5fAccessories
Would this have all the pipes needed to install it on the car? (i searched but many links were to dead ebay posts that people bought). I guess i wont need the vortech discharge tube or power pipe with this anymore would I ( I was looking to get these ).

Im at 370 rwhp peak as it sits where do you think I could be after this?

If any one has a GOOD writeup for installing it and maybe going blowthrough would you mind posting it all i have seen are a little different it seems.
This is the one I have. It came with all piping. As a matter of fact it came with to much piping. It fit really well. Make sure you tighten the couplings under the car good. Mines came off twice.. Sounded cool tho. Like a frigging jet..
Soldier GT is offline  
Old 05-24-2011, 06:58 PM
  #4  
rman101
2nd Gear Member
Thread Starter
 
rman101's Avatar
 
Join Date: Dec 2007
Location: Florida
Posts: 405
Default

http://cgi.ebay.com/ebaymotors/28x7x...Q5fAccessories

could i run this one and not have to cut the bumper support?
rman101 is offline  
Old 05-25-2011, 12:40 PM
  #5  
school boy
5th Gear Member
 
school boy's Avatar
 
Join Date: May 2009
Location: kentucky
Posts: 2,241
Default

that i/c has a inlet/outlet size of 2.5. with that in mind, it wont flow as well but would work
school boy is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bokeo
Street/Strip
6
10-10-2015 08:28 PM
Explosive
Street/Strip
17
10-02-2015 07:45 AM
uedlose
The Racers Bench
4
10-01-2015 08:31 PM
2015Ecoboost
New Member Area
3
09-17-2015 01:48 PM
SANDY21
V6 (1994-2004) Mustangs
3
08-17-2015 02:41 PM



Quick Reply: Intercooler and PowerPipe



All times are GMT -5. The time now is 07:02 PM.