4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Still ticking

Old 03-17-2012, 08:33 PM
  #1  
fox213506
Thread Starter
 
fox213506's Avatar
 
Join Date: Jan 2012
Location: Virginia
Posts: 5
Default Still ticking

Hello all i have a tick in my engine it is a '99 cobra 4V. It started when i had a spark plug blow out and some pieces fell in the cylinder. Tick sounds exactly like a lash adjuster. i have checked the adjusters and they are all very solid. ticks only at idle below 1200 rpm, hot or cold, with or without load. nI can tell it in the engine

Now my question is when my spark plug blew out and the pieces fell into the cylinder. What is the most likely thing that happened? Bent a valve, scratched cylinder wall if you guys can point me in any direction that would be great.

This car has been to the stealership and they couldn't figure it out. I also can't find a mechanic familiar with this engine.

Maybe someone can tell me a way to make sure my engine is safe to drive and i could just live with the noise
fox213506 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nick Oliver
V6 S197 General Discussion
6
10-17-2018 04:22 AM
69Volunteer
Classic Mustang General Discussion
1
09-30-2015 10:39 AM
Sixer4Life
New Member Area
4
09-28-2015 07:05 AM
Shadow7874
2005-2014 Mustangs
4
09-24-2015 09:06 PM
Emblazoned
General Tech
0
09-03-2015 10:45 PM


Thread Tools
Search this Thread
Quick Reply: Still ticking



All times are GMT -5. The time now is 04:06 AM.