Turn Signal Issue
#1
Turn Signal Issue
I've just purchased a 98' Mustang GT, 4.6L. Both of my turn signals on the front were out, back ones were fine. So I bought new bulbs, and put them in. Well the driver side turn signal works perfectly fine now, but the passenger side doesn't blink. The regular parking light, or whatever the name is for it, stays on. So the bulb works, just not the turn signal. Just seeing if anyone on here could be of help to me? Thanks for taking the time to read this and help if you can!
#2
Try another lamp, or swap them side to side just to be sure--I have purchased bad lamps before;
Check the socket to make sure it's not corroded;
Check the bright filament connection voltage at the socket with a multimeter;
That the rear signal blinks rules out the multi-function switch, if there is no voltage at the connector when there should be (signal on) then it is a wiring problem...
Check the socket to make sure it's not corroded;
Check the bright filament connection voltage at the socket with a multimeter;
That the rear signal blinks rules out the multi-function switch, if there is no voltage at the connector when there should be (signal on) then it is a wiring problem...
Thread
Thread Starter
Forum
Replies
Last Post