View Poll Results: Best rebuild t45
The T45 SOURCE
2
50.00%
Hanlon
1
25.00%
Promotion
0
0%
Keisler
1
25.00%
Voters: 4. You may not vote on this poll
T45 upgrade POLL
04-24-2013, 08:48 PM
#11
Well, if that's what you have your heart set on for that amount of money. So be it, the Source quote I got for mine was no where near 2k, unless you're including shipping as well.
I would change the clutch anyway if I went to all the trouble of pulling the trans out. That way I would have the piece of mind that everything was new when I stabbed the trans back in.
I would change the clutch anyway if I went to all the trouble of pulling the trans out. That way I would have the piece of mind that everything was new when I stabbed the trans back in.
I would like to have my gearbox good for approx 600hp for future mods.. I don't know any other option of a BUILT gearbox I can put in my hands for $2000 that will handle future mods..
04-24-2013, 09:07 PM
#12
2nd Gear Member
Join Date: Aug 2012
Location: MS
Posts: 467
Hey man, I'm not judging you at all. I overlooked the original info about about the vortech you already have installed. I have a 2000 GT as well, but I've stayed very modest with mine as its a dd, and other responsibilities.
Good luck with your build, I'm sure it's a beast already as is.
Good luck with your build, I'm sure it's a beast already as is.
04-24-2013, 09:18 PM
#13
3rd Gear Member
Join Date: Nov 2009
Location: AZ
Posts: 589
I'd go with a t56 and save a whilelonget before I'd put money into a t 45 . 26 spline on T56 will require the same clutch you have to buy for. 26 spline t45 if memory serves me right. You can find em with the upgrade input for 1300ish if you look. Much stronger. And safer.
04-25-2013, 09:14 AM
#15
Keisler makes a built t45 to handle alot of power too, they call it the rs-500 or something but it is infact a t45 with different guts, should def be more than just a reman t45 with a different bell.
04-26-2013, 08:44 PM
#16
This one.....Tim,
We have a 500 torque rated T45 for $1899 + shipping and can take your 2
cores in for $600 credit. We currently have a 10-12 week lead time on
these units.
Jeff Kauffman
Keisler Engineering Inc.
2250 Stock Creek Blvd.
Rockford TN 37853
865-609-8187 ext. 212
www.keislerauto.com
I have heard to many good things about the T45 source,,,, I think that's where my money's going..funny, I'm trying to spend $2k on a trans,, sent 8 emails, and only 2 company's reply.
Kinda a heads up on GOOD CUSTOMER SERVICE,,, before you pay..Zac has replyed in 2 different emails,,, with all the info I asked for.
As for the other guys in the biz,,,YOU LOSE..
We have a 500 torque rated T45 for $1899 + shipping and can take your 2
cores in for $600 credit. We currently have a 10-12 week lead time on
these units.
Jeff Kauffman
Keisler Engineering Inc.
2250 Stock Creek Blvd.
Rockford TN 37853
865-609-8187 ext. 212
www.keislerauto.com
I have heard to many good things about the T45 source,,,, I think that's where my money's going..funny, I'm trying to spend $2k on a trans,, sent 8 emails, and only 2 company's reply.
Kinda a heads up on GOOD CUSTOMER SERVICE,,, before you pay..Zac has replyed in 2 different emails,,, with all the info I asked for.
As for the other guys in the biz,,,YOU LOSE..
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
0
10-01-2015 08:58 AM
Boostaddict
3.7L V6 S550 Tech 2015 - 2017
0
10-01-2015 08:57 AM
