Passenger Floor Wet - MustangForums.com


Go Back   MustangForums.com > Ford Mustang Tech > 4.6L (1996-2004 Modular) Mustang
Search


4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Passenger Floor Wet

Reply
 
 
 
Thread Tools Search this Thread
Old 07-08-2014, 02:28 AM   #1
Valnar300
 
Valnar300's Avatar
 
Join Date: Mar 2014
Vehicle: 2002 Ford Mustang GT
Location: California
Posts: 17
Default Passenger Floor Wet

OK, I've got water coming in from the AC, its not draining through the firewall like it should. I've already unclogged it with a coat hangar and blew it out with air. That fixed it for a little bit, but now its clogged again. Is there any way to access the drain from the HVAC box side so I could pull out all the gunk thats in it? Preferably without pulling apart the entire dash.

Thanks!
__________________
2002 Mustang GT: manual Mach 1 trans, 4.10 gears, Diablo tuner, 245/45/17 and 275/40/17 tires, Spec clutch, Magnaflow downturn exhaust
Valnar300 is offline   Reply With Quote
Old 07-08-2014, 11:08 AM   #2
kast1376
3rd Gear Member
 
kast1376's Avatar
 
Join Date: Jun 2006
Vehicle: 2004 GT
Location: Sacramento
Posts: 658
Johnny-Goonhand
Send a message via Yahoo to kast1376
Default

Quote:
Originally Posted by Valnar300 View Post
OK, I've got water coming in from the AC, its not draining through the firewall like it should. I've already unclogged it with a coat hangar and blew it out with air. That fixed it for a little bit, but now its clogged again. Is there any way to access the drain from the HVAC box side so I could pull out all the gunk thats in it? Preferably without pulling apart the entire dash.

Thanks!
I have never had this issue, but I am guessing that since you used a hanger and blew it out, that all that did was blow/push the gunk higher up and in.

If you have a shop vac, I would try to build a reducer to fit the drain, and use the vac to suck out the gunk.
__________________

Quote:
Originally Posted by Margarita Girl View Post
I like happy endings. Just saying.
LM1s, MGW, MM subframes and CC, H&R SS, Blues, Bassani Catted X, 13" brakes, 3.73 gears
kast1376 is offline   Reply With Quote
Old 07-08-2014, 06:02 PM   #3
Valnar300
 
Valnar300's Avatar
 
Join Date: Mar 2014
Vehicle: 2002 Ford Mustang GT
Location: California
Posts: 17
Default

Click the image to open in full size.

Thats where the leak drips out from
__________________
2002 Mustang GT: manual Mach 1 trans, 4.10 gears, Diablo tuner, 245/45/17 and 275/40/17 tires, Spec clutch, Magnaflow downturn exhaust
Valnar300 is offline   Reply With Quote

 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
S197 Parts baddog671 Parts For Sale 20 07-26-2016 01:20 PM
Original Owner 1970 Mustang b8checker Classic Mustangs (Tech) 8 10-08-2015 12:55 PM
Chassis wiggle when off throttle? UrS4 S197 Handling Section 10 10-03-2015 06:23 AM
Original Owner 1970 Mustang b8checker New Member Area 3 09-30-2015 07:11 AM
V6 Project Problems ThatJuanStang V6 (1994-2004) Mustangs 4 09-25-2015 08:01 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

 

All times are GMT -5. The time now is 03:38 AM.



This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company