Cams, cams, cams...
#16
Here's the one I used back when:
http://www.modularheadshop.com/camdegree.aspx
I thought it was easy to follow and straight forward. If anyone has questions, I would be happy to answer. I enjoy doing these things most wont attempt. Not to say I'm better but to learn. Right now I'm putting back together a LS 5.3 harness and building the relays/obdII port. Yes I am a nerd
http://www.modularheadshop.com/camdegree.aspx
I thought it was easy to follow and straight forward. If anyone has questions, I would be happy to answer. I enjoy doing these things most wont attempt. Not to say I'm better but to learn. Right now I'm putting back together a LS 5.3 harness and building the relays/obdII port. Yes I am a nerd
#17
Thanks School, pretty good guide, have you ever done one with out removing the head?
Seems like it could be difficult to find true TDC without removing the head.
I'm not a nerd i swear
Seems like it could be difficult to find true TDC without removing the head.
I'm not a nerd i swear
Last edited by WJL; 02-12-2016 at 10:03 AM.
Thread
Thread Starter
Forum
Replies
Last Post
skinzy98
V6 (1994-2004) Mustangs
5
11-18-2015 10:23 AM