?3.73 gears or 4.10 gears 96 g
#1
?3.73 gears or 4.10 gears 96 g
can anyone tell me what are the best gears for this year. what can i expect from the two. and how much am i looking at. what would a shop charge to install. besides the other mods soon to come, magnaflow x pipe, borla cat-back, volant cai, jet chip, is this a must have. any suggestions <IMG src=smileys/smiley20.gif border="0">would be great. thanks
#2
?3.73 gears or 4.10 gears 96 g
General sentiment on this board is go with the 4.10's. Around $180 for the gears, around $150-$200 to install.</P>
Underdrive pullys and timing adjuster are a good mod as well.</P>
</P>
#3
?3.73 gears or 4.10 gears 96 g
if your gonna buy gears get Ford Racing gears... thats what everyone will tell you.... and this website has them for the cheapest ive ever seen.</P>
http://www.gefracing.com/Merchant2/m...ry_Code=46REAR</P>
</P>
#4
?3.73 gears or 4.10 gears 96 g
two other awesome websites that have the gears for 139 www.buyofrormotorsport.com and www.buyfordracing.com
#6
?3.73 gears or 4.10 gears 96 g
I would go with 3.73's because 4.10's are too much for high way driving cause you will be reving it really high on the highway. If you had an auto then you should go with a 4.10, because an auto tranny takes away hp to run it. So go with 3.73 and PRO 5.0 is very good. So I second that.
#7
?3.73 gears or 4.10 gears 96 g
how will the 3.73 feel. i dont drive car that much, but it is highway driving to work. will the 3.73 rev high, or will it be comfortable at 65-70. plus is it a noticable pick up in the *** of the car. thanks for any help.<IMG src=smileys/smiley14.gif border="0">
#9
?3.73 gears or 4.10 gears 96 g
3.73s over stock are awesome. They don't add too much RPMon highway, but pull a lot harder than thestock 3.27s. I have Ford Racing and from what I've heard, read, and experienced that is the best for fit, easy (professional) installation, and no tranny noise. </P>
You'll need to add a ratio conversion computer for any size other than stock to get your MPH and odometer to read correctly.It costs about $110 online and is relatively easy to DIY install. </P>
Good luck.</P>
#10
?3.73 gears or 4.10 gears 96 g
Originally Posted by Jason
You'll need to add a ratio conversion computer for any size other than stock to get your MPH and odometer to read correctly.It costs about $110 online and is relatively easy to DIY install. </P>
Good luck.</P>
I thought you just needed a Spedo Recalibration Gear... and thats like 15 bux over at steeda.com</P>