Go Back   MustangForums.com > Ford Mustang Tech > 4.6L (1996-2004 Modular) Mustang > 4.6L General Discussion
Sign in using an external account
Register Forgot Password?
Search


4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Welcome to Mustang Forums!
Welcome to Mustang Forums.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!


Reply
 
 
 
 
Thread Tools Search this Thread
Old 11-02-2007, 08:41 PM   #1
Indy88colts
1st Gear Member
 
Join Date: Jun 2007
Location:
Posts: 101
Default 1996 GT vacuum line pics , need help please !!

I'm installing a new intake manifold on my 96 gt and my digital camera is broken. Does any body have or could take some pics of where all the vacuum lines are so when I go to put everything back together , I don't run into problems with the vacuum lines. Everything else i'm pretty sure I can get but I might not remember where all the vacuum lines were. Any help would be greatly appreciated.

Thank you,
Mark
This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Mustang Forums!
__________________
1996 Mustang GT
JLT Cold air intake
UD Pulleys
Pro 5.0 shifter
Indy88colts is offline   Reply With Quote
Old 11-02-2007, 08:45 PM   #2
oxfordgt
6th Gear Member
 
oxfordgt's Avatar
 
Join Date: May 2006
Location: ky
Posts: 6,290
Default RE: 1996 GT vacuum line pics , need help please !!

They will only go where they reach. Impossible to mess it up.
oxfordgt is offline   Reply With Quote
Old 11-02-2007, 08:50 PM   #3
Indy88colts
1st Gear Member
 
Join Date: Jun 2007
Location:
Posts: 101
Default RE: 1996 GT vacuum line pics , need help please !!

Well from what I remember , there isn't a whole lot of vacuum lines , I know the driver side there is like 2 of them. 1 going to the erg and the other to whatever it is. The passenger side has more but a pic would be great so I make sure I don't screw it up. I'm infamous for taking things apart and not being able to put it back together right and this is my first time tackling a decent sized project on my car. I have everything off right now except the old manifold, just waiting on the new one to arrive.
__________________
1996 Mustang GT
JLT Cold air intake
UD Pulleys
Pro 5.0 shifter
Indy88colts is offline   Reply With Quote
Old 11-02-2007, 09:09 PM   #4
oxfordgt
6th Gear Member
 
oxfordgt's Avatar
 
Join Date: May 2006
Location: ky
Posts: 6,290
Default RE: 1996 GT vacuum line pics , need help please !!

There is one in the back of the plenum for the evap canister, on the drivers side there is one that goes on the EGR and the Fuel pressure sensor (the "whatever it is"). On the front of the plenum right after the TB is the one that has the small red vacum lines that run to the EGR and FPS. On the front right of the plenum just past the IAC is for the pcv which runs to the passengerside valve cover. The IAC runs to the intake tube.
oxfordgt is offline   Reply With Quote
Old 11-03-2007, 08:54 PM   #5
Indy88colts
1st Gear Member
 
Join Date: Jun 2007
Location:
Posts: 101
Default RE: 1996 GT vacuum line pics , need help please !!

I pretty much know where they go, just thought someone would help me out with a couple pics so I can use as reference.

Thank you
__________________
1996 Mustang GT
JLT Cold air intake
UD Pulleys
Pro 5.0 shifter
Indy88colts is offline   Reply With Quote
Old 11-04-2007, 04:52 PM   #6
BlackMage
5th Gear Member
 
BlackMage's Avatar
 
Join Date: Oct 2003
Vehicle: 96 GTS
Location: Northern Wisconsin
Posts: 2,002
Send a message via AIM to BlackMage
Default RE: 1996 GT vacuum line pics , need help please !!

http://www.mustangforums.com/m_3833004/tm.htm
hope this helps man
__________________

DRIVE A HYBRID MY MUSTANG NEEDS YOUR GAS


Install Guides by yours truly: Clutch cable, PI Intake, Mishimoto Fan, Color your FORD Emblem, Interior Carpet
BlackMage is offline   Reply With Quote
Old 11-04-2007, 05:33 PM   #7
oxfordgt
6th Gear Member
 
oxfordgt's Avatar
 
Join Date: May 2006
Location: ky
Posts: 6,290
Default RE: 1996 GT vacuum line pics , need help please !!

LOL go look in the underhood pics thread. Im sure you'll find what your looking for.
oxfordgt is offline   Reply With Quote
Old 11-04-2007, 07:41 PM   #8
Indy88colts
1st Gear Member
 
Join Date: Jun 2007
Location:
Posts: 101
Default RE: 1996 GT vacuum line pics , need help please !!

Thanks , that should be good. I appreciate it.

Mark
__________________
1996 Mustang GT
JLT Cold air intake
UD Pulleys
Pro 5.0 shifter
Indy88colts is offline   Reply With Quote
Old 11-04-2007, 07:41 PM
MustangForums
Ford Mustang




Paid Advertisement

 
 
 
Reply

Tags
1996, 96, broke, canister, evap, ford, gt, hose, line, mustang, pic, pressure, red, routing, sensor, vacuum

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Advertising

Featured Sponsors
Vendor Directory
New Sponsors
All times are GMT -5. The time now is 11:30 AM.

© Internet Brands, Inc.


This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
Emails Backup