When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So this friday i locally bought a used Vortech V2 Si trim and the only pulley he had, he included in the sale. Its a 3.60 pulley and from what ive seen on here 3.33 is what you should get to have around 9 PSI and about 370-400 RWHP.
How much PSI/RWHP would I probably make with the 3.60 pulley?
So this friday i locally bought a used Vortech V2 Si trim and the only pulley he had, he included in the sale. Its a 3.60 pulley and from what ive seen on here 3.33 is what you should get to have around 9 PSI and about 370-400 RWHP.
How much PSI/RWHP would I probably make with the 3.60 pulley?
3.33 is good for around 9psi if you have an intercooler. Without the intercooler the 3.60 pulley will hit 7-9psi.
Yes. Reduces boost pressure but will decrease temperatures. To achieve the same amount of boost with an intercooler that you would have without one, you will need to drop down a pulley size.