Mach 1 Eaton Swap Build
03-02-2011, 02:04 PM
#41
2nd Gear Member
Thread Starter
Join Date: Jun 2007
Location:
Posts: 275
that hose that comes out the bottom of the lower intake needed to be screwed in a little more than the cobras have it and then I grinded it down it a tiny tiny bit. The lower intake had just the smallest leak which is what was causing that howling noise!!
03-02-2011, 02:33 PM
#43
2nd Gear Member
Thread Starter
Join Date: Jun 2007
Location:
Posts: 275
It's like a T out the back of the lower intake... the PCV hose connects on one side and the other hose connects back to the blower.
03-02-2011, 02:41 PM
#44
4th Gear Member
Join Date: Jul 2008
Location: NC
Posts: 1,956
I see, KB setups just route the crankcase air over to the intake like stock. All the same but I wonder why Ford did it that way, or the other way around.
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
AMAlexLazarus
AmericanMuscle.com
0
10-01-2015 09:21 AM
