4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Radio Support Bracket?

Thread Tools
 
Search this Thread
 
Old 05-16-2011, 10:03 PM
  #1  
MustangLouver
3rd Gear Member
Thread Starter
 
MustangLouver's Avatar
 
Join Date: Dec 2008
Location: North Carolina
Posts: 915
Default Radio Support Bracket?

When I bought my car, it had the stock radio in, when I pulled the stock radio out to put a new radio in, I found that the piece that the radio mounts on was broken. The piece I'm talking about it about a half inch thick support that runs under the radio. Does anyone know what this piece would be called, or where I could find one. It really bothers me that my radio constantly bounces up and down in the mount and rattles.

Thanks guys.
MustangLouver is offline  
Old 05-16-2011, 10:39 PM
  #2  
Kerns
4th Gear Member
 
Kerns's Avatar
 
Join Date: Dec 2008
Location: Tulsa, OK
Posts: 1,478
Default

Its part of the bezel itself. So you will need a new radio bezel.
Kerns is offline  
Old 05-17-2011, 07:21 PM
  #3  
MustangLouver
3rd Gear Member
Thread Starter
 
MustangLouver's Avatar
 
Join Date: Dec 2008
Location: North Carolina
Posts: 915
Default

No, its part of the dash support. Ill take a picture of it tomorrow. If its part of the bezel then that's about $70 ill be pulling one from the junk yard of that's the case.
MustangLouver is offline  
Old 05-17-2011, 08:36 PM
  #4  
huey_33
2nd Gear Member
 
huey_33's Avatar
 
Join Date: Sep 2004
Location: From Ohio, Stationed in NC
Posts: 454
Default

It is part of the bezel itself. You need a new bezel if you want the radio support.
huey_33 is offline  
Old 05-17-2011, 08:39 PM
  #5  
MustangLouver
3rd Gear Member
Thread Starter
 
MustangLouver's Avatar
 
Join Date: Dec 2008
Location: North Carolina
Posts: 915
Default

Originally Posted by huey_33
It is part of the bezel itself. You need a new bezel if you want the radio support.
Alright. Thanks. Guess its time to go to the junk yard. Definitely not paying $70 for a new one.
MustangLouver is offline  
Old 05-17-2011, 09:34 PM
  #6  
Bpohlman13
3rd Gear Member
 
Bpohlman13's Avatar
 
Join Date: Mar 2010
Location: California
Posts: 611
Default

Are you talking about the stamped metal part directly below the stereo, or the plastic arm that attaches to the radio and that stamped steal part?
Bpohlman13 is offline  
Old 05-17-2011, 09:36 PM
  #7  
MustangLouver
3rd Gear Member
Thread Starter
 
MustangLouver's Avatar
 
Join Date: Dec 2008
Location: North Carolina
Posts: 915
Default

The metal part. I believe it goes from one side of the dash opening to the other, and where it connects to the drivers side of the dash it is broke off so the radio bounces when I drive. I'll get a pic tomorrow.
MustangLouver is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cr620
V6 (1994-2004) Mustangs
2
10-03-2022 10:18 PM
kevsgt
2005-2014 Mustangs
5
10-09-2015 10:12 PM
Explosive
Street/Strip
17
10-02-2015 07:45 AM
Boostaddict
Lethal Performance
0
10-01-2015 08:58 AM
Boostaddict
3.7L V6 S550 Tech 2015 - 2017
0
10-01-2015 08:57 AM



Quick Reply: Radio Support Bracket?



All times are GMT -5. The time now is 08:30 PM.