4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Code P0340 cam position sensor

Old 06-27-2011, 02:43 PM
  #1  
chking37
Thread Starter
 
chking37's Avatar
 
Join Date: Oct 2010
Location: Virginia
Posts: 9
Default Code P0340 cam position sensor

I have a 1996 Gt Vert with 200K on it.
It threw a code of P0340 (cam positon sensor)
My question is, Where is the sensor located?
I was going to change it first to see if this fixes the problem. I've also read that the alternator can trip this code but since the sensor is $30 and the Alt is $200, I'm hoping the cheaper one does the trick.
Thanks in advance for your help.
chking37 is offline  
Old 06-27-2011, 03:39 PM
  #2  
jwog666
5th Gear Member
 
jwog666's Avatar
 
Join Date: Mar 2008
Location: wisconsin
Posts: 2,260
Default

mine used to throw that code when the temps were above 85, replace the sensor = fixed. the sensor is located on the left hand side of the engine front cover, one bolt holds it in place. its a 5 min job max.
jwog666 is offline  
Old 06-27-2011, 05:22 PM
  #3  
chking37
Thread Starter
 
chking37's Avatar
 
Join Date: Oct 2010
Location: Virginia
Posts: 9
Default

I must be blind. All I see are the coil packs and power steering res.
Is it lower down?
chking37 is offline  
Old 06-28-2011, 01:32 PM
  #4  
jwog666
5th Gear Member
 
jwog666's Avatar
 
Join Date: Mar 2008
Location: wisconsin
Posts: 2,260
Default

Originally Posted by chking37
I must be blind. All I see are the coil packs and power steering res.
Is it lower down?
yes its lower down below the coil packs, you are very close just look a little closer.

here is a pic but you will need to zoom in a bit, sorry its line art.
Attached Thumbnails Code P0340 cam position sensor-imageswlinks.jpg  
jwog666 is offline  
Old 06-28-2011, 04:31 PM
  #5  
chking37
Thread Starter
 
chking37's Avatar
 
Join Date: Oct 2010
Location: Virginia
Posts: 9
Default

ah ha, found it hiding behind the power steering res.
thanks for the help.
chking37 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jb145700
4.6L V8 Technical Discussions
9
08-21-2022 06:37 AM
Big Al's 03
Mach 1 Section
4
09-21-2015 07:59 AM
trashxtrash
4.6L (1996-2004 Modular) Mustang
4
09-20-2015 10:49 PM
Big Al's 03
4.6L (1996-2004 Modular) Mustang
2
09-16-2015 07:31 PM
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM


Thread Tools
Search this Thread
Quick Reply: Code P0340 cam position sensor



All times are GMT -5. The time now is 06:28 AM.