whats all needed for gear install?
#42
Where in Tx are you at? If you're in one of the metro areas (DFW, ATX, Htown, SA) you may have a bit of an issue on inspection, even with cats. Anywhere else, you should be fine. You can definitely run some high-flow cats with longtubes, no issue there.
Last edited by LRSjmac; 11-18-2011 at 03:31 PM.
#46
Damn, Jon! You really covered this thread! Guess I shouldn't have left he office early yesterday! lol
Yes, I would not at all considering going cat-less. High flow cats, like the the ones in the BBK h-pipe I suggested to you should be more than adequate to get you down to acceptable NoX levels and have you passing emissions. Either that, or you can just cut the stock cats out of your stock exhaust and clamp or weld them in place of the BBK units. This would definitely get you passing with no problems!
I hope this helps!
Please feel free to PM me if you have any direct questions in the future!
Have a great weekend!
Yes, I would not at all considering going cat-less. High flow cats, like the the ones in the BBK h-pipe I suggested to you should be more than adequate to get you down to acceptable NoX levels and have you passing emissions. Either that, or you can just cut the stock cats out of your stock exhaust and clamp or weld them in place of the BBK units. This would definitely get you passing with no problems!
I hope this helps!
Please feel free to PM me if you have any direct questions in the future!
Have a great weekend!
#47
For sure!
LOL! Just trying to help out.
LOL! Just trying to help out.
Last edited by LRSjmac; 11-21-2011 at 07:53 AM.
Thread
Thread Starter
Forum
Replies
Last Post