Installed HIDs now fogs wont work.
#3
I've got the same issue atm, my dad installed them while I was deployed and I haven't gotten around to fixing it yet. Ill try to fix it tomorrow and update if no one else chimes in.
#4
What that means is that for what ever reason the high beam power is ON, this activates the fog-lamp cut-off relay blocking them from turning on. You need to determine why the high beam power seems to be permanently on.
#5
^ agreed
You have a wiring issue, but cannot figure it out from here
Go over ALL the details of the wiring and keep in mind the following things:
1. When the high-beams go on, the low-beams go off.
2. When the high-beams go on, the fog lights go off.
Go back over ALL of the connections and make sure they make sense. Sounds to me, you have a dual-HID bulb, as my pepe Bpoh has suggested. Are these HID's being installed in the OEM headlights?
Jazzer
You have a wiring issue, but cannot figure it out from here
Go over ALL the details of the wiring and keep in mind the following things:
1. When the high-beams go on, the low-beams go off.
2. When the high-beams go on, the fog lights go off.
Go back over ALL of the connections and make sure they make sense. Sounds to me, you have a dual-HID bulb, as my pepe Bpoh has suggested. Are these HID's being installed in the OEM headlights?
Jazzer
#7
You may have just swapped a wire. I did that to my HID's the first time I put them in. I had 3 wires because I had a hi beam on mine. I just had to switch the two wires that were on opposite sides and it worked fine after that.