Did I blow it?
#11
my bad man it is 0351 i was just going from memory, on the tuner i used to read the code it actually had the code and the description. i just drained the oil. It was very light brown but i didnt see any milky watery seperation. I did notice very very tiny specs of metal though
#13
^+1, yup...
The most likely cause for P0351, if the COP checks out, is a wiring problem in the red wire from the CCRM to the COP (KOEO there should be +12V between the red wire and ground), or the light green/white wire from the COP to the PCM; or a blown driver in the PCM.
Thirty seconds with a diagnostic scope will tell you which...
The most likely cause for P0351, if the COP checks out, is a wiring problem in the red wire from the CCRM to the COP (KOEO there should be +12V between the red wire and ground), or the light green/white wire from the COP to the PCM; or a blown driver in the PCM.
Thirty seconds with a diagnostic scope will tell you which...
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM