tork tech numbers and high iats
#1
tork tech numbers and high iats
Got my Tork Tech terminator kit dynoed today! It put down 405rwhp and 425rwtq, ran out of fuel at 5500rpm so I need to purchase a pump booster....This was with a 2.93 pulley that produced 11psi!
After the dyno runs while my car was idling it had IATs of 142 degrees. My tuner said it was unsafe to drive. So today i ran it for a while and let it warm up and didnt really keep an eye on the temp. I started it up again and the IAT was 108 and after ten minutes at idle it went to 126. Once i drive the car the IATs stayed in the high 120s and 130s while cruising and maybe giving it a little gas here and there! Is this normal? Temp outside was 90f with 65% humidity
After the dyno runs while my car was idling it had IATs of 142 degrees. My tuner said it was unsafe to drive. So today i ran it for a while and let it warm up and didnt really keep an eye on the temp. I started it up again and the IAT was 108 and after ten minutes at idle it went to 126. Once i drive the car the IATs stayed in the high 120s and 130s while cruising and maybe giving it a little gas here and there! Is this normal? Temp outside was 90f with 65% humidity
#3
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM
mungodrums
Suspension
0
09-24-2015 10:12 PM