4.6 Engine Swap
02-15-2014, 10:31 AM
#1
Thread Starter
Join Date: Feb 2014
Location: Maryland
Posts: 1
4.6 Engine Swap
Total my 98 GT automatic transmission. The Engine and transmission is still good. I purchase a 95 GT shell that had a manual transmission. I want to stay with a manual transmission. Can I used my 4.6 engine from the 98. If so, what do I need to do to make the swap? I know the basics. My concern is the detail stuff such as the electronics/computer.
02-16-2014, 12:32 PM
#2
5th Gear Member
Join Date: May 2009
Location: kentucky
Posts: 2,241
hello and welcome!
First off, that transmission out of he 95 will not bolt to the 4.6. It has a different bolt pattern. If you still want to continue the swap, you will need the complete wiring harness, ecm, guage cluster, ect. You also need the 4.6 k member, trans crossmember, exhaust. youre pretty much swapping literally everything from one shell to the other.
First off, that transmission out of he 95 will not bolt to the 4.6. It has a different bolt pattern. If you still want to continue the swap, you will need the complete wiring harness, ecm, guage cluster, ect. You also need the 4.6 k member, trans crossmember, exhaust. youre pretty much swapping literally everything from one shell to the other.
Thread
Thread Starter
Forum
Replies
Last Post
