You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I just got the SOS Triple Gauge Pods with the Raptor claw and I have to say that I am not overly impressed. I bought this because everything that I heard was that it was the best part out there for gauge pods. The pods are not evenly spaced and the unit did not come with the raptor claw. I am working with the shipper to get the claw issue resolved. I just thought that for $140 I would get a flawless piece. The two bottom pods are about 1/8 inch apart and the top one is 1/4 inch from the middle one. This does not sound like much but it is immediately noticeable because the clearances are so close. I think that I will explore other mounting options. You would think that someone out there would create an OEM looking part (center pods) that matches the interior grain and color. I was looking at the autometer center-gauge pod but have read bad things about the quality. Does anyone have any suggestions?
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
try and contact SOS and see what they say, maybe get a replacement.
mine is very good, i am totally satisfied with it.
looks OEM, fitment is great.
i wouldn't trade it for any other gauge pod.
__________________
hellion turbo kit 80 triple bb turbo, 3:73 gears, ud pulleys, imrc deletes, mmr 950 stroker motor, fore precision triple fuel hat with 2 gt pumps, fore precision fuel rails, 80lb injectors, competition clutch 1620 and light weight flywheel, 640rwhp 700wtrq 18psi 93 pump gas tuned by Dan and Rob at PRO DYNO http://mustangforums.com/forum/groups/nc-mustangs.html
give Alan a call @ SOS - his service is top notch!!
__________________
Tngstn 06GT-5 spd -Vortech HO S/C-Tuned by Realspeed Auto
You can never have too much power, just not enough traction. 11.867 @ 119.35
Mine is similar, although it sounds like yours is much worse.. the top pod is spaced a little different than the bottom 2. It looks like it has to do with the curve of the pillar. If the top one was lower, it couldn't line up quite right with the other 2 unless it turned a little..
I would definitely call them though, if your gaps are that far out of proportion.
You would think that someone out there would create an OEM looking part that matches the interior grain and color.
I ordered SOS gauge pods a couple years ago for my car. They used an actual Ford A-pillar part, so it matched the color and grain perfectly. I know they used a real Ford part because the Ford part # was stamped on the inside of it.
__________________
2007 Mustang GT
Mods: JLT CAI/w Brenspeed 93 tune, JBA LT headers and O/R H-pipe, Ford Racing axle-back exhaust
305rwhp 322rwtq
Give us a call (866.48.GAUGE) if you wish to discuss this directly with us.
Otherwise, I have contacted your shipper and instructed them to handle your issue however they see fit. If you wish to try another option, I told them I'd help bring the pillar back to see where the mistake was made.
I admit, there is a problem with that part, and I would like to determine what went wrong.
Call your dealer, feel free to call us, and hopefully your issue will be resolved quickly.
Your business is appreciated, and I'm disappointed we didn't live up to our reputation.
__________________
Tngstn 06GT-5 spd -Vortech HO S/C-Tuned by Realspeed Auto
You can never have too much power, just not enough traction. 11.867 @ 119.35
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
SOS Gauge pods
