You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
So today we had a dyno day with the shop that ran my original dyno four weeks ago. On that day, it was 89 degrees and humidity was at 110%, and I made a respectable 303/318 to the rear wheels, with my one problem being that I re-used the factory H pipe and connected it to the long tubes, which is 2 1/4" instead of the 2.5" I should have. Today, at 94 degrees and with the humidity at 110% and with the addition of my new X-pipe with dumped M-80s right before the rear axle, I pulled off 306/291 on the first pull, 323/301 on the second pull, and when they finally got the converter locked in, I made a crazy 331/336 to the rear wheels! In an automatic! I'm so happy lol
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
__________________
JLT,CMCV Delete, MAC L/T, X-Pipe & Dumped M80s, 3.73s, CHE LCA, Steeda Adj. UCA, Steeda Adj. Panhard Bar, Steeda Camber Kit, TCI 3000 TC
331/336... 8.291@82.4mph in the 1/8th
Built by Ronnie Sanchez of MMP... Tuned by Chris Jones of BBR... What a great team!
nice numbers..... but how can the humidity be 110%?
__________________
Tngstn 06GT-5 spd -Vortech HO S/C-Tuned by Realspeed Auto
You can never have too much power, just not enough traction. 11.867 @ 119.35
nice numbers..... but how can the humidity be 110%?
lol check forecsasts for anywhere in south florida, the humidity in the southern half of florida is typically over 100% from june through early ocotober, it's so humid down here most of the time that if you go outside in a tanktop and shorts, I promise you, you WILL be drenched if you're in the sun for more than five minutes or wet spots all over your clothes after two minutes lol. Crazy s*** isn't it?!
__________________
JLT,CMCV Delete, MAC L/T, X-Pipe & Dumped M80s, 3.73s, CHE LCA, Steeda Adj. UCA, Steeda Adj. Panhard Bar, Steeda Camber Kit, TCI 3000 TC
331/336... 8.291@82.4mph in the 1/8th
Built by Ronnie Sanchez of MMP... Tuned by Chris Jones of BBR... What a great team!
Highest I see is 91% for the day your pulls were done...
I also checked a handful of other days back into August and also nothing about 90s
__________________
Tngstn 06GT-5 spd -Vortech HO S/C-Tuned by Realspeed Auto
You can never have too much power, just not enough traction. 11.867 @ 119.35
i didnt think it could get above 100% humidity...unless you are being exaggerative like saying "way to give it 110%". i live in houston, so i know what humidity is, but it usually stays around 85-95% around summer time.
either way, those are GREAT numbers, especially to be pulled in this heat and with so little mods. I had all your mods and then some and the best i ever did was 325whp/341tq. its a little higher now though, lol
__________________
Procharged 10PSI H.O. Intercooled
498whp/445wtq
For sale: plasma booster ignition
Quote:
Red Turbo Integra
That's the plan. The only thing that sucks is I have a dentist apointment in the morning. Hopefully all the numbing sh1t wears off quick so I don't look like a retard drooling on myself.
no worries....it just didn't make scientific sense to me.... as I graduated college with a science degree
__________________
Tngstn 06GT-5 spd -Vortech HO S/C-Tuned by Realspeed Auto
You can never have too much power, just not enough traction. 11.867 @ 119.35
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
New Dyno Numbers Are In!
